1 Units Dow Filmtec SW30-2514 100 GPD - Sea Water Membrane Element
FILMTEC™ seawater reverse osmosis elements offer the highest productivity while maintaining excellent salt rejection. • • • FILMTEC SW30 membrane elements have the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. FILMTEC SW30 elements may also be operated at lower pressure to reduce pump size, cost and operating expenses. Improved FILMTEC seawater membrane combined with automated, precision element fabrication result in the most consistent product performance available.
The Dow FILMTEC TW30-2514 Sea Water Membrane is specifically designed for applications where the higher TDS (Total Dissolved Solids) of marine water is addressed by the a thin film composite which sustains the higher pressures typically utilized in sea water reverse osmosis applications while maintaining a 99.4 percent stabilized salt rejection.
- Up to 150 Gallon Per Day production
- Up to 800 SIPG
- Fits Standard 2.5" Housings or Pressure Vessels
- Highest flow rates available to meet the water demands of both sea-based and land-based desalinators
- May also be operated at lower pressure to reduce pump size, cost and operating expenses
- Improved FILMTEC seawater membrane combined with automated, precision element fabrication result in the most consistent product performance available
Membrane Type: Polyamide Thin-Film Composite
Maximum Operating Temperature: 113°F (45°C)
Maximum Operating Pressure: 1,000 psi(69 bar)
Maximum Pressure Drop: 15 psig (1.0 bar)
Approximate Length: 14"
Active Area: 6.5 sq. ft.
Average Nacl Rejection: 0.99
Chlorine Tolerance: <0.1 ppm
Cleaning Ph Range: 1-13
Direction: Outside - In
Inlet Pressure: 800 PSI
Material Of Construction:Polyamide Thin-Film
Max Feed Silt Density Index: 5 Silt Density Index
Max Pressure Drop:15 PSI Differential
Max Pressure (Psi): 1000
Max Temp (°F): 113
Membrane Type: Spiral Wound
Permeate Tube Diameter: 3/4"
Ph Range: 2-11
Cartridge Style: Drop-in
Change Frequency: 5 Years
Flow Rate: 150 GPD
Compatible with FILMTEC Membranes 80733
|Product Name||Nominal Active Surface Area
|Permeate Flow Rate
|Stabilized Salt Rejection